MDR series_Yueqing Mingwei Electric Co., Ltd

•Universal AC input/Full range
•Protections: Short circuit / Overload / Over voltage
•Cooling by free air convection
•Can be installed on DIN rail TS-35/7.5 or 15
•Built in DC OK active signal
•LED indicator for power on
•No load power consumption<0.75W
•100% full load burn-in test
•2 years warranty

2. Specification

MODEL		MDR-40-5	MDR-40-12	MDR-40-15	M DR-40-24	MDR-40-48
OUTPUT	DC VOLTAGE	5V	12V	15V	24V	48V
	RATED CURRENT	6A	3.33A	2.66A	1.7A	0.83A
	CURRENT RANGE	0~6A	0-3.33A	0-2.66A	0 ~ 1.7A	0 ~ 0.83A
	RATED POWER	30W	40W	39.9W	40.8W	39.8W
	RIPPLE & NOISE (max.) Note.2	80mVp-p	120mVp-p	120mVp-p	150mVp-p	200mVp-p
	VOLTAGE ADJ. RANGE	5-6V	12 ~ 15V	15-18V	24 - 30V	48 - 56V
	VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%	± 1.0%	± 1.0%
	LINE REGULATION	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	LOAD REGULATION	±1.0%	±1.0%	±1.0%	± 1.0%	± 1.0%
	SETUP, RISE TIME Note.5	500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
	HOLD UPTIME (Typ.)	50ms/230VAC 20ms/115VAC at full load
	VOLTAGE RANGE	85 ~ 264VAC 120 ~ 370VDC
INPUT	FREQUENCY RANGE	47 ~63Hz
	EFFICIENCY (Typ.)	78%	86%	86%	88%	88%
	AC CURRENT (Typ.)	1.1 A/115 VAC 0.7A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 30A/115VAC,60A/230VAC
	LEAKAGE CURRENT	<1mA/240VAC
PROTECTION	OVERLOAD	105 ~ 160% rated output power
	OVERLOAD	Protection type : Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	6.25 - 7.25V	15.6 -18V	19.5-22.5V	31.2-36V	57.6-64.8V
	OVER VOLTAGE	Protection type : Shut down o/p voltage, re-power on to recover
FUNCTION	DC OK ACTIVE SIGNAL (max.)	Relay contact rating{max.): 30V/1A resistive
ENVIRONMENT	WORKING TEMP.	-20 ~ +70C (Refer to "Derating Curve")
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85C, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/C (0 ~ 50℃)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY &EMC (Note 4)	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH
	EMC EMISSION	Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
	EMC IMMUNITY	Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024,EN61000-6-1,EN61204-3, light industry level, criteria A
OTHERS	MTBF	301.7K hrs min. MIL-HDBK-217F (25℃)
OTHERS	DIMENSION	4090100mm (WHD)

3. Mechanical Dimension

4. Block Diagram

5.DC OK Relay Contact

6Derating Curve

7.Output Derating VS Input Voltage

8. Please Note

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.

3.Tolerance : includes set up tolerance, line regulation and load regulation.

4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

5.Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.

If you have any enquiry about quotation or cooperation, please feel free to email us at maggie-liu@yqmingwei.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

E-mail *
	For example : cbh@sscmwl.com
Message *
Product	MDR-40
Your Name *
	For example : Smith Zhang. First name and Last name
Company
	For example : Yueqing Mingwei Electric Co.,Ltd.
Country
	For example : China
Telephone
	For example : 0086-577-62777777 (Country code + City code + Tel numbers)

recommended