Language: English

You are here:        Home > Product > Mini size series > NES series >

recommended

350W Switching Power Supply

  • Product Overview
  • Send Inquiry
  • 1.Features

    ‧AC input range selectable by switch
    ‧Protections: Short circuit / Overload / Over voltage / Over temperature
    ‧Cooling by free air convection
    ‧Withstand 300VAC surge input for 5 seconds.
    ‧Bulit-in constant current limting circuit
    ‧100% full load burn-in test
    ‧LED indicator for power on
    ‧Fixed switching frequency at 90 KHz
    ‧Low cost, high reliability, high efficiency and long life 
    ‧2 years warranty

     

    2. Specification

    MODEL 
    NES-350-3.3 
    NES-350-5 
    NES-350-7.5 
    NES-350-12 
    NES-350-15 
    NES-350-24 
    NES-350-27
    NES-350-36
    NES-350-48 
     
    OUTPUT 
    DC VOLTAGE
    3.3 V 
    5V 
    7.5V 
    12V 
    15V 
    24V 
    27V 
    36V 
    48V 
    RATED CURRENT 
    60A
    60A
    46A
    30A
    23.2A
    14.6A
    13A 
    9.7A
    7.3A
    CURRENT RANGE 
    0~60A
    0~60A
    0~46A
    0~30A
    0~23.2A
    0~14.6A
    0 ~ 13A 
    0~9.7A
    0~7.3A
    RATED POWER 
    198W 
    300W
    345W
    360W
    348W
    360W
    351W 
    349W
    350.4W
    RIPPLE & NOISE (max.) Note.2 
    150mVp-p 
    150mVp-p
    150mVp-p
    150mVp-p
    150mVp-p
    150mVp-p
    200mVp-p 
    240mVp-p
    240mVp-p
    VOLTAGE ADJ. RANGE 
    2.97 ~ 3.7V 
    4.5 ~5.6V
    6 ~ 9V
    10~ 13.5V
    13.5~18V
    20~26.4V
    26 ~ 32V 
    32~40V
    41~56V
    VOLTAGE TOLERANCE Note.3 
    +3% ,-4.5% 
    ±3.0%
    ±2.0%
    ±1.5%
    ±1.0%
    ±1.0%
    ±1.0% 
    ±1.0%
    ±1.0%
    LINE REGULATION 
    ±0.5% 
    ±0.5%
    ±0.5%
    ±0.5%
    ±0.5%
    ±0.5%
    ±0.5% 
    ±0.5%
    ±0.5%
    LOAD REGULATION 
    ±2.5% 
    ±2.0%
    ±2.0%
    ±1.0%
    ±0.5%
    ±0.5%
    ±0.5% 
    ±0.5%
    ±0.5%
    SETUP, RISE TIME 
    1000ms, 50ms/230VAC   1000ms, 50ms/115VAC at full load
    HOLD UP TIME (Typ.) 
    20ms/230VAC  16ms/115VAC at full load 
    INPUT 
    VOLTAGE RANGE Note 7 
    90 ~ 132VAC / 180 ~ 264VAC selected by switch  254 ~ 370VDC 
    FREQUENCY RANGE 
    47 ~ 63Hz 
    EFFICIENCY (Typ.) 
    74%
    78%
    80%
    83%
    84%
    87%
    88%
    87.5%
    87.5%
    AC CURRENT (Typ.) 
    7A/115VAC   4A/230VAC 
    INRUSH CURRENT (Typ.) 
     
    40A/115VAC  60A/230VAC 
    LEAKAGE CURRENT 
    <3.5mA / 240VAC 
    PROTECTION 
    OVERLOAD 
    105~ 135% rated output power 
    Protection type :Constant current limiting, recovers automatically after after fault condition is recover
    OVER VOLTAGE 
    3.8-4.6V
    5.75 ~ 7.5V 
    9.4 ~ 11.25V 
    13.8~ 16.2V 
    18 ~ 21V 
    27.6~ 32.4V 
    33.7 ~ 39.2V 
    41.4~ 46.8V 
    57.6~ 67.2V 
    Protection type : Shut down O/P voltage, re-power on to recover
    OVER TEMPERATURE
    90°C±5°C (3.3-7.5V) , 85°C±5°C 12-15V) ,80°C±5°C (24V), 75°C±5°C (27-48V), (TSW1) Detect on case
    Protection type : Shut down O/P voltage, recovers automatically after temperature is gose down
    ENVIRONMENT 
    WORKING TEMP. 
    -20 + 60℃(Refer to load derating curve") 
    WORKING HUMIDITY 
    20 ~ 90% RH non-condensing C34
    STORAGE TEMP., HUMIDITY 
    -20 ~ +85℃, 10 ~ 95% RH 
    TEMP. COEFFICIENT 
    ± 0.03%℃/ (0 ~ 50 ℃ ) 
    VIBRATION 
    10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes 
    SAFETY & EMC Note 8
    WITHSTAND VOLTAGE 
    I/P-O/P:3KVAC  I/P-FG:2KVAC   O/P-FG:0.5KVAC 
    ISOLATION RESISTANCE 
    I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH 
    OTHERS 
    MTBF 
    234.3 Khrs min. MIL-HDBK-217F (25℃) 
    DIMENSION 
    215*115*50mm (L*W*H) 

    3. Mechanical Dimension

    4. Block Diagram

    5.Derating Curve

    6.Static Characteristics

    7. Please Note

    1. All parameters not specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 
    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  
    3.Tolerance: includes set up tolerance, line regulation and load regulation.
    4.Please connect positive pole of input voltage to mark “L” of the terminal block and connect negative pole of input voltage with mark “N” of the terminal block. using DC voltage for input voltage.



  • If you have any enquiry about quotation or cooperation, please feel free to email us at maggie-liu@yqmingwei.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

    E-mail *
      For example : cbh@sscmwl.com
    Message *
    Product
    Your Name *
      For example : Smith Zhang. First name and Last name
    Company
      For example : Yueqing Mingwei Electric Co.,Ltd.
    Country
      For example : China
    Telephone
      For example : 0086-577-62777777 (Country code + City code + Tel numbers)
     

Yueqing Mingwei Electric Co., Ltd.2014 All Rights Reserved    Powered:盛世传媒-温州网站建设-乐清网站建设

Sales Hotline:+86-577-62627101 丨 Wenzhou Yueqing, Zhejiang, China