RS-100
RS series
Print This Page
In the favorites
E-Mail : maggie-liu@yqmingwei.com
PDF : Download Technical Documents
Online consulting：
- Product Overview
- Send Inquiry
-
1.Features
•Universal AC input/Full range
•Protections: Short circuit / Overload / Over voltage / Over temperature
•Cooling by free air convection
•100% full load burn-in test
•High operating temperature up to 70℃
•LED indicator for power on
•No load power consumption<0.5W
•All using 105℃ long life electrolytic capacitors
•Withstand 300VAC surge input for 5 second
• Withstand 5G vibration test
•2 years warranty
•High efficiency,long life and high reliability2. Specification
MODELRS-100-3.3RS-75-5RS-75-12RS-75-15RS-75-24RS-75-48OUTPUTDC VOLTAGE3.3V5V12V15V24V48VRATED CURRENT20A16A8.5A7A4.5A2.3ACURRENT RANGE0 ~ 20A0 ~ 16A0 ~ 8.5A0 ~ 7A0 ~ 4.5A0 ~ 2.3ARATED POWER66W80W102W105W108W110.4WRIPPLE & NOISE (max.) Note.280mVp-p80mVp-p120mVp-p120mVp-p120mVp-p200mVp-pVOLTAGE ADJ. RANGE3.2V ~ 3.5V4.75 ~ 5.5V11.4 ~ 13.2V14.25 ~ 16.5V22.8 ~ 26.4V45.6 ~ 52.8VVOLTAGE TOLERANCE Note.33.00%2.00%1.00%1.00%1.00%1.00%LINE REGULATION0.50%0.50%0.50%0.50%0.50%0.50%LOAD REGULATION2.00%1.00%0.50%0.50%0.50%0.50%SETUP, RISE TIME Note.5500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full loadHOLD UPTIME (Typ.)60ms/230VAC 14ms/115VAC at full loadVOLTAGE RANGE88 ~ 264VAC 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage)INPUTFREQUENCY RANGE47 ~63HzEFFICIENCY (Typ.)74.00%77.00%81.00%82.00%84.00%84.00%AC CURRENT (Typ.)2.5A/115VAC 1.5A/230VACINRUSH CURRENT (Typ.)COLD START 40A/230VACLEAKAGE CURRENT<2mA / 240VACPROTECTIONOVERLOAD110 ~ 150% rated output powerProtection type : Hiccup mode, recovers automatically after fault condition is removedOVER VOLTAGE3.8 ~ 4.45V5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6~ 32.4V55.2 ~ 64.8VProtection type : Hiccup mode, recovers automatically after fault condition is removedENVIRONMENTWORKING TEMP.-25~70℃ （Refer to: Derating Curve"）WORKING HUMIDITY20 ~ 90% RH non-condensingSTORAGE TEMP., HUMIDITY-40 ~ +85C, 10 ~ 95% RHTEMP. COEFFICIENT±0.03%/C (0 ~ 50℃)VIBRATION10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axesSAFETY &EMC (Note 4)WITHSTAND VOLTAGEI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVACISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RHEMC EMISSIONCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3EMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2), heavy industry level, criteria AOTHERSMTBF265Khrs min. MIL-HDBK-217F (25 )DIMENSION159*97*38mm (L*W*H)3. Mechanical Dimension
4.Block Diagram
5.Derating Curve
6.Static Characteristics
7.Please Note1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3.Tolerance : includes set up tolerance, line regulation and load regulation. 4.Line regulation is measured from low line to high line at rated load 5.Load regulation js measured form 0% to 100% rated load 6.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests,please refer to"EMI testing of component power supplies." 
-
If you have any enquiry about quotation or cooperation, please feel free to email us at maggie-liu@yqmingwei.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.