SCN series_Yueqing Mingwei Electric Co., Ltd

1. AC input 200~240V only
2. Protections: Short circuit / Overload / Over voltage / Over temp.
3. High reliability/ Low ripple noise
4. Built-in remote sense function
5. Built-in remote ON-OFF control
6. Built-in parallel operation function
7. Can adjust from 20~100% output voltage by external control 1-5V
8. Forced air cooling by built-in DC fan
9. Case coating with paint
10. 2 years warranty

2. Specification

Model Specification	SCN-1K5-12	SCN-1K5-15	SCN-1K5-24	SCN-1K5-48
DC Output Voltage	12V	15V	24V	48V
Iutput Voltage Error	± 1%	± 1%	± 1%	± 1%
Rated Output Current	125A	100A	62.5A	32A
Output Current Range	0-125A	0-100A	0-62.5A	0-32A
Tripple and Noise	240mVp-p	240mVp-p	240mVp-p	480mVp-p
Voltage Adj range	±5.0% typical adjustment by potentiometer 20~100% adjustment by 1~5VDC external control
Iniet Stability	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Tolerance Voltage	± 1%	± 1%	± 1%	± 1%
DC Output Power	1500W	1500W	1500W	1536W
Efficiency	84%	83%	85.5%	87%
AC Input Voltage Range	200 ~ 240VAC 290 ~ 370VDC
Input Current	15.0A/230VAC
AC Inrush Current	Cold-Start Current: 120A / 230VAC
Leakage Current	3.5mA/240VAC
Overload Protection	110 ~ 135% rated output power,Current limiting, delay shut down o/p voltage, re-power on to recover
Over Voltage Protection	110 ~ 135% follow to output set up point, Shut down o/p voltage, re-power on to recover
High Temperature Protection	>100℃ / measure by heat sink, near transformer,Shut down o/p voltage, re-power on to recover
Temperature Coefficient	± 0.04% /℃ (0~50℃)
Start, Rise, Hold time	800ms, 50ms, 16ms at full load
Vibration	10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Withstand Voltage	I/P-O/P, I/P-FG:1500VAC
Isolation Resistance	I/P-O/P, I/P-FG, 100M Ohms / 500VDC / 25 ℃/ 70% RH
Working Temp,Humidity	`-10℃~+60℃ (Refer to Output Derating Cutve), 20%~90%RH
Storage Temp,Humidity	`20℃~+85℃, 10%~95%RH
MTBF	60Khrs min. MIL-HDBK-217F (25 ℃)
Overall Dimension	291132132 mm
Weight	4.75 kgs
Special function	DC voltage adj., Remote sensing, remote control, parallel operation (refer to terminal instruction manual)
Safety Standards	CE
EMC Standards	Meet FCC Part 15J Conduction class A

3. Mechanical Dimension:

4.Derating Curve

5.External DC Control VS Output Voltage

6. Please Note:

1. 1.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient.

2. Tolerence: includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.

4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

If you have any enquiry about quotation or cooperation, please feel free to email us at maggie-liu@yqmingwei.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

E-mail *
	For example : cbh@sscmwl.com
Message *
Product	SCN-1500
Your Name *
	For example : Smith Zhang. First name and Last name
Company
	For example : Yueqing Mingwei Electric Co.,Ltd.
Country
	For example : China
Telephone
	For example : 0086-577-62777777 (Country code + City code + Tel numbers)

recommended