S-60
S series
Print This Page
In the favorites
E-Mail : maggie-liu@yqmingwei.com
PDF : Download Technical Documents
Online consulting：
- Product Overview
- Send Inquiry
-
1.Features
1. Input voltage selected by switch
2. Protection: short-circuit/ over-load/ over-voltage protection
3. Cooling by air
4. 100% full load burn-in test
5. 1 year warranty
2. Specification
Model
SpecificationS-60-5VS-60-12VS-60-15VS-60-24VDC Output Voltage5V12V15V24VIutput Voltage Error± 2%± 1%± 1%± 1%Rated Output Current12A5A4A2.5AOutput Current Range0-12A0-5A0-4A0-2.5ATripple and Noise100mVp-p120mVp-p120mVp-p120mVp-pIniet Stability± 0.5%± 0.5%± 0.5%± 0.5%Tolerance Voltage± 1%± 0.5%± 0.5%± 0.5%DC Output Power60W60W60W60WEfficiency73%76%77%79%Adjustable Range for DC Voltage`+10, -5%± 10%± 10%± 10%AC Input Voltage Range85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDCInput Current2A/115V 1A/230VAC Inrush CurrentCold-Start Current: 30A/115V, 60A/230VLeakage Current<1mA/240VACOverload Protection105%~150% Type: Cut Output, Reset: Auto RecoveryOver Voltage Protection…………High Temperature Protection…………Temperature Coefficient± 0.03% /℃ (0~50℃)Start, Rise, Hold time800ms, 50ms, 10ms, /115VAC 300ms, 50ms, 80ms, /230VACVibration10~500Hz, 2G 10min,/1cycle, a total of 60 minutes, Each axesWithstand VoltageBetween Input and Output: 1.5KVAC, Input and Shell: 1.5KVAC, Output and Shell: 0.5KVACIsolation ResistanceInput and Output Intermal: Input and Enclosute, Output and Enclosure: 500VDC/100M OhmsWorking Temperature and Humidity`-10℃~+60℃ (Refer to Output Derating Cutve), 20%~90%RHStorage Temperature and Humidity`20℃~+85℃, 10%~95%RHOverall Dimension159*98*38mmWeight0.56kgsSafety StandardsCE certificateEMC StandardsMeet FCC Part 15J Conduction class B3. Mechanical Dimension
4.Please Note1. The testing condition for the parameter above is: 230VAC input, rated load, 25℃ 70%Rh, Humidity. 2. Error, include the setting error, line stability and load stability. 3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting. 4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage. 5. Load stability test: the load is from 0% to 100%, others 60%. 6. C2,3,6 must be knocked down. 
-
If you have any enquiry about quotation or cooperation, please feel free to email us at maggie-liu@yqmingwei.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.