S series_Yueqing Mingwei Electric Co., Ltd

Model Specification	S-150-5V	S-150-7.5V	S-150-9V	S-150-12V	S-150-13.5V	S-150-15V	S-150-24V	S-150-27V	S-150-48V
DC Output Voltage	5V	7.5V	9V	12V	13.5V	15V	24V	27V	48V
Iutput Voltage Error	± 2%	± 1%	± 1%	± 1%	± 1%	± 1%	± 1%	± 1%	± 1%
Rated Output Current	30A	20A	16.7A	12.5A	11.2A	10A	6.5A	5.6A	3.2A
Output Current Range	0-30A	0-20A	0-16.7A	0-12.5A	0-11.2A	0-10A	0-6.5A	0-5.6A	0-3.2A
Tripple and Noise	150mVp-p	150mVp-p	180mVp-p	180mVp-p	180mVp-p	180mVp-p	240mVp-p	240mVp-p	240mVp-p
Iniet Stability	± 0.5%	± 0.5%	± 0.3%	± 0.3%	± 0.3%	± 0.3%	± 0.2%	± 0.2%	± 0.2%
Tolerance Voltage	± 0.5%	± 0.5%	± 0.3%	± 0.3%	± 0.3%	± 0.3%	± 0.2%	± 0.2%	± 0.2%
DC Output Power	150W	150W	150.3W	150W	151.2W	150W	156W	151.2W	153.6W
Efficiency	78%	80%	80%	82%	83%	84%	85%	86%	87%
Adjustable Range for DC Voltage	4.5-5.5V	6-8.3V	8-10.4V	10.6-13.2V	12-15V	13.5-16.5V	21-28V	24-30V	43-53V
AC Input Voltage Range	85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC
Input Current	3.2A/115V 1.6A/230V
AC Inrush Current	Cold-Start Current: 35A/115V, 60A/230V
Leakage Current	<3.5mA/240VAC
Overload Protection	105%~150% Type: Cut Output, Reset: Auto Recovery
Over Voltage Protection	…………
High Temperature Protection	…………
Temperature Coefficient	± 0.03% /℃ (0~50℃)
Start, Rise, Hold time	100ms, 50ms, 20ms
Vibration	10~500Hz, 2G 10min,/1cycle, a total of 60 minutes, Each axes
Withstand Voltage	Between Input and Output: 1.5KVAC, Input and Shell: 1.5KVAC, Output and Shell: 0.5KVAC
Isolation Resistance	Input and Output Intermal: Input and Enclosute, Output and Enclosure: 500VDC/100M Ohms
Working Temperature and Humidity	`-10℃~+60℃ (Refer to Output Derating Cutve), 20%~90%RH
Storage Temperature and Humidity	`20℃~+85℃, 10%~95%RH
Overall Dimension	19911050mm
Weight	0.8kgs
Safety Standards	CE
EMC Standards	Meet FCC Part 15J Conduction class B

3. Mechanical Dimension

4.Please Note

1. The testing condition for the parameter above is: 230VAC input, rated load, 25℃ 70%Rh, Humidity.
2. Error, include the setting error, line stability and load stability.
3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting.
4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage.
5. Load stability test: the load is from 0% to 100%, others 60%.
6. C2,3,11 must be knocked down.

If you have any enquiry about quotation or cooperation, please feel free to email us at maggie-liu@yqmingwei.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

E-mail *
	For example : cbh@sscmwl.com
Message *
Product	S-150
Your Name *
	For example : Smith Zhang. First name and Last name
Company
	For example : Yueqing Mingwei Electric Co.,Ltd.
Country
	For example : China
Telephone
	For example : 0086-577-62777777 (Country code + City code + Tel numbers)

recommended